24K MRCOOL® Hyper Heat Central Ducted Air Handler
Component — Not a Complete System
This is the indoor unit only. To run, you also need a matching outdoor condenser and a refrigerant line set. Looking for the complete system instead? Browse complete 24,000 BTU systems.
SKU CENTRAL-24-HP-MUAH230A00
With Incentives
Save up to $605Hyper Heat cold-climate model — automatically meets CEE Tier 2. Find your state's rebate
Request a quote and we'll check when it's back, or match you to the closest in-stock unit.
We'll reply by email with availability or an in-stock alternative, and you can message us about it any time.
Sizing Help
Not sure if 24K BTU is right for your space?
Proper sizing prevents short-cycling, high bills, and premature failure. Our sizing tool takes 60 seconds.
Resources
Brochures & Manuals
Description
24K MRCOOL® Hyper Heat Central Ducted Air Handler
What's in the Box
Here's what you'll receive with your order
Wall-Mount Air Handler
Indoor ductless mini-split unit
Wireless Remote Control
Handheld remote with temperature control
Mounting Plate & Hardware
Wall mounting bracket and screws
Owner Manual
Installation and operation guide
Key Specifications
24000BTU
Cooling Capacity
208-230V
Voltage
36dBA
Noise Level
24000BTU
Heating Capacity
24K MRCOOL® Hyper Heat Central Ducted Air Handler — Model Details
What this specific model is sized for, how it installs, how it performs, and what it costs to run.
Room & Space Coverage — 24,000 BTU
The 24K MRCOOL® Hyper Heat Central Ducted Air Handler delivers 24,000 BTU of cooling and heating capacity, sized for spaces up to 1,200 sq ft in standard 8-ft ceiling rooms with average insulation. At this capacity the unit handles medium primary rooms, master suites with attached bath, converted garages, and workshops. If your space includes a sunny west-facing wall or a finished bonus room above it, lean toward the upper end of the coverage range.
Power & Electrical Requirements
Power requirement: 208-230V 1-phase 60Hz (standard US residential 240V service). Minimum circuit ampacity is 4A with a maximum overcurrent protection of 15A. Wire the outdoor unit with 14 AWG copper on a dedicated 15A double-pole breaker (or single-pole at 120V), with a disconnect within sight of the condenser per NEC 440.14.
Install Difficulty — Professional Install
This is a professionally-installed condenser that requires a licensed HVAC technician with EPA 608 certification. The tech will pull a vacuum on the line set to 500 microns, pressure-test with nitrogen, release the factory charge, and commission per MrCool's startup procedure. Budget 1 full day for install on a single-zone system. The system supports line set lengths up to 164.04ft; longer runs are available as accessory kits. Plan the shortest practical route — every 10ft of line set adds roughly 2% capacity loss. Ships with R-410A refrigerant. R-410A is a mature, widely-serviced refrigerant; service technicians and parts are available at any HVAC supply house.
Sound Level & Comfort Features
Operating sound level ranges from 33 dB(A) on low to 39 dB(A) on high — the low end is whisper-quiet, below a normal conversation (60 dB) and comparable to a library reading room. The indoor blower offers 4 fan speeds plus auto mode, letting you trade airflow for quiet operation in bedrooms while running louder in living areas.
Product Details
The 24K MRCOOL® Hyper Heat Central Ducted Air Handler is an affordable and efficient choice for your home's heating and cooling requirements, regardless of external weather conditions. With an impressive SEER2 rating of up to 17.4 and an HSPF2-4 rating of up to 10, its enhanced heating capacity ensures optimal performance. Constructed from painted galvanized steel, the unit's side-discharge design, slide-out blower, self-diagnostics panel, and removable filters make maintenance simple and easy. Effortless installation is possible by an HVAC technician, as the unit is compatible with the optional MRCOOL® No-Vac® Quick Connect® Line Set. Pre-charged with environmentally friendly R410-A refrigerant, this line set removes the need for vacuuming or flare welding and is kink-resistant. It also provides versatile installation possibilities due to its adaptability to various configurations. If required, an optional heat kit can be acquired separately. The unit also includes a wired thermostat and wireless remote. In the unlikely event of any operational concerns, the air handler is backed by a reassuring 10-year warranty for parts and labor, offering you peace of mind. Furthermore, registration is not required for the included labor warranty.
Specifications
| Cooling Capacity | 24,000 BTU |
| Heating Capacity | 24,000 BTU |
| Voltage | 208-230 V |
| Refrigerant | R-410A |
| Noise Level | 36 dBA |
| Max Line Set | 164.04 ft |
| Airflow | 823.53/758.82/694.12/629.41 CFM |
| Phase | 1 |
| Refrigerant Type | R-410A |
| Liquid Line Size | 3/8 |
| Suction Line Size | 3/4 |
Features
- Enhanced Heating Capacity
- Includes features such as timer mode, auto cool mode, fan only mode, and more
- Wired Thermostat Included (.78 in x 4.72 in x 4.72in)
- Multi-Position Installation
- Variable Speed
- Optional Heat Kit
- Compact, Side Discharge Design
- R-410A environmentally friendly refrigerant
- Follow Me™ Function
- Easy-Access Removable Filter
Frequently Asked Questions
Everything you need to know about this product
What size room will the 24K MRCOOL® Hyper Heat Central Ducted Air Handler cool?
Do I need a licensed HVAC installer?
What electrical circuit do I need for installation?
How fast does HVACZAR ship this unit?
What if it arrives damaged or I change my mind?
What is the warranty on the 24K MRCOOL® Hyper Heat Central Ducted Air Handler?
How long does shipping take?
What size room does 24,000 BTU cover?
Do you offer returns?
How can I pay?
Related Products
Ships Nationwide — Shop by State
We deliver the 24K MRCOOL® Hyper Heat Central Ducted Air Handler to all 50 states via FedEx, UPS, and truck freight. Each state page lists local rebate programs and utility incentives.






