ProDirect 3 Ton 14 SEER Split System A/C Air Handler - Multiposition
Component — Not a Complete System
This is the indoor unit only. To run, you also need a matching outdoor condenser and a refrigerant line set. Looking for the complete system instead? Browse complete 34,500 BTU systems.
SKU HAH14036
Request a quote and we'll check when it's back, or match you to the closest in-stock unit.
We'll reply by email with availability or an in-stock alternative, and you can message us about it any time.
Sizing Help
Not sure if 35K BTU is right for your space?
Proper sizing prevents short-cycling, high bills, and premature failure. Our sizing tool takes 60 seconds.
Description
ProDirect 3 Ton 14 SEER Split System A/C Air Handler - Multiposition
What's in the Box
Here's what you'll receive with your order
Wall-Mount Air Handler
Indoor ductless mini-split unit
Wireless Remote Control
Handheld remote with temperature control
Mounting Plate & Hardware
Wall mounting bracket and screws
Owner Manual
Installation and operation guide
Key Specifications
34500BTU
Cooling Capacity
208-230V
Voltage
47-51dBA
Noise Level
ProDirect 3 Ton 14 SEER Split System A/C Air Handler - Multiposition — Model Details
What this specific model is sized for, how it installs, how it performs, and what it costs to run.
Room & Space Coverage — 34,500 BTU
The ProDirect 3 Ton 14 SEER Split System A/C Air Handler - Multiposition delivers 34,500 BTU of cooling and heating capacity, sized for spaces up to 1,500 sq ft in standard 8-ft ceiling rooms with average insulation. At this capacity the unit is typically used for open-plan main floors, large garages, pole barns, finished basements, and small commercial bays. For homes with vaulted ceilings, heavy sun exposure, or poor insulation, plan on ~20% more BTU per square foot than the nominal coverage.
Efficiency & Operating Cost
This unit is rated at 14 SEER2. SEER2 measures seasonal cooling efficiency — higher is better — and 14 meets current federal baseline. Running the unit 8 hours a day at full load draws roughly 591 kWh/month — about $95/month at the US average $0.16/kWh residential rate. Real-world draw is usually 30–50% lower because inverter compressors modulate down most of the time.
Power & Electrical Requirements
Power requirement: 208-230V 1-phase 60Hz (standard US residential 240V service).
Install Difficulty — Professional Install
This is a professionally-installed condenser that requires a licensed HVAC technician with EPA 608 certification. The tech will pull a vacuum on the line set to 500 microns, pressure-test with nitrogen, release the factory charge, and commission per MrCool's startup procedure. Budget 1 full day for install on a single-zone system.
Sound Level & Comfort Features
Operating sound level ranges from 47 dB(A) on low to 51 dB(A) on high — comparable to typical residential mini-split output. The indoor blower offers 3 fan speeds for basic airflow control.
What's in the Box & Compatibility
Ships as a Air Handler.
Product Details
You don’t have to compromise your comfort to save money! Just get this ProDirect 3 Ton 14 SEER Multiposition Split System Air Handler. When this unit is installed, you’ll just sit back, relax, and let the “A” shaped evaporator coil take the discomfort away from your home. The three-speed direct drive blower motor will then push the comfortable air through a removable filter to clean it and out into your home for you and your family to enjoy. You can also have electric heat kits installed in this air handler to keep you toasty on freezing nights. It’ll be hard to remember how your home felt before you got this air handler started providing comfort for the entire family. The galvanized steel cabinet that encases the air handler protects it from corrosion and other harm. To reassure you of its quality, this unit is AHRI certified and ETL listed. When you register this product online, you’ll be given a long term warranty for extra peace of mind. Make your life at home more comfortable with this MRCOOL ProDirect 3 ton split system air handler.
Specifications
| Cooling Capacity | 34,500 BTU |
| SEER2 Rating | 14 |
| Voltage | 208-230 V |
| Noise Level | 47-51 dBA |
| SEER Rating | 14 |
| Airflow | 1376/1235/1161 CFM |
| Phase | 1 |
| Country of Origin | China |
Features
- Equipment should be installed by a qualified professional
- 10 Year Registered Warranty
- AHRI Certified & ETL listed
Frequently Asked Questions
Everything you need to know about this product
What size room will the ProDirect 3 Ton 14 SEER Split System A/C Air Handler - Multiposition cool?
Do I need a licensed HVAC installer?
Is this unit eligible for the federal 25C tax credit?
What electrical circuit do I need for installation?
How fast does HVACZAR ship this unit?
What if it arrives damaged or I change my mind?
What is the warranty on the ProDirect 3 Ton 14 SEER Split System A/C Air Handler - Multiposition?
How long does shipping take?
What size room does 34,500 BTU cover?
What is the efficiency rating?
Do you offer returns?
How can I pay?
Related Products
Ships Nationwide — Shop by State
We deliver the ProDirect 3 Ton 14 SEER Split System A/C Air Handler - Multiposition to all 50 states via FedEx, UPS, and truck freight. Each state page lists local rebate programs and utility incentives.






