PRODIRECT Series 3 Ton BTU PSC Air Handler
Component — Not a Complete System
This is the indoor unit only. To run, you also need a matching outdoor condenser and a refrigerant line set. Looking for the complete system instead? Browse complete 36,000 BTU systems.
SKU HAH036FPA
Request a quote and we'll check when it's back, or match you to the closest in-stock unit.
We'll reply by email with availability or an in-stock alternative, and you can message us about it any time.
Sizing Help
Not sure if 36K BTU is right for your space?
Proper sizing prevents short-cycling, high bills, and premature failure. Our sizing tool takes 60 seconds.
Description
PRODIRECT Series 3 Ton BTU PSC Air Handler
What's in the Box
Here's what you'll receive with your order
Wall-Mount Air Handler
Indoor ductless mini-split unit
Wireless Remote Control
Handheld remote with temperature control
Mounting Plate & Hardware
Wall mounting bracket and screws
Owner Manual
Installation and operation guide
Key Specifications
36000BTU
Cooling Capacity
208/230V
Voltage
PRODIRECT Series 3 Ton BTU PSC Air Handler — Model Details
What this specific model is sized for, how it installs, how it performs, and what it costs to run.
Room & Space Coverage — 36,000 BTU
The PRODIRECT Series 3 Ton BTU PSC Air Handler delivers 36,000 BTU of cooling and heating capacity, sized for spaces up to 1,500 sq ft in standard 8-ft ceiling rooms with average insulation. At this capacity the unit is typically used for open-plan main floors, large garages, pole barns, finished basements, and small commercial bays. For homes with vaulted ceilings, heavy sun exposure, or poor insulation, plan on ~20% more BTU per square foot than the nominal coverage.
Power & Electrical Requirements
Power requirement: 208/230V 1-phase 60Hz (standard US residential 240V service). Minimum circuit ampacity is 3.3A with a maximum overcurrent protection of 15A. Wire the outdoor unit with 14 AWG copper on a dedicated 15A double-pole breaker (or single-pole at 120V), with a disconnect within sight of the condenser per NEC 440.14.
Install Difficulty — Professional Install
This is a professionally-installed condenser that requires a licensed HVAC technician with EPA 608 certification. The tech will pull a vacuum on the line set to 500 microns, pressure-test with nitrogen, release the factory charge, and commission per MrCool's startup procedure. Budget 1 full day for install on a single-zone system. Ships with R410a refrigerant. R-410A is a mature, widely-serviced refrigerant; service technicians and parts are available at any HVAC supply house.
Product Details
The 3 Ton PRODIRECT™ Series PSC Air Handler offers exceptional reliability and efficiency for your home’s HVAC needs. Designed for smooth compatibility with both cooling and heat pump systems, it adapts easily to various home configurations. With a SEER2 rating of 15.2, this model ensures strong energy efficiency. Constructed with all-aluminum tubes and fins, the air handler is built for durability and corrosion resistance, supporting long-lasting performance. The 36K PRODIRECT™ Air Handler features a factory-sealed cabinet that minimizes air leakage to 2% or less at 1.0 inch water column pressure, enhancing energy efficiency. Its versatile design allows for multi-positional installation, easily accommodating different setups. Both horizontal and vertical condensate drain pans are included, simplifying installation in various spaces. Maintenance is hassle-free due to the slide-out blower and coil components. You can customize the heating capacity with optional heat kits ranging from 5 to 20 kW, giving you greater control over your comfort levels. This unit meets high industry standards, holding both AHRI certification and ETL-listed to ensure quality and reliability. Backed by MRCOOL®’s standard 5-year warranty plus an additional 5-year extended parts and compressor warranty upon registration., the 3 Ton PRODIRECT™ Series PSC Air Handler is an excellent choice for year-round home comfort.
Specifications
| Cooling Capacity | 36,000 BTU |
| Voltage | 208/230 V |
| Refrigerant | R410a |
| Phase | 1 |
| Refrigerant Type | R410a |
| Liquid Line Size | 3/8 |
| Suction Line Size | 3/4 |
Features
- Multiposition installation
- Blower and coil easy slide out for ease of maintenance
- Evaporator Coil Tube Material: Aluminum
- Evaporator Coil Tube Size(in.): 9/32
- AHRI Listed & ETL Certified.
Frequently Asked Questions
Everything you need to know about this product
What size room will the PRODIRECT Series 3 Ton BTU PSC Air Handler cool?
Do I need a licensed HVAC installer?
What electrical circuit do I need for installation?
How fast does HVACZAR ship this unit?
What if it arrives damaged or I change my mind?
What is the warranty on the PRODIRECT Series 3 Ton BTU PSC Air Handler?
How long does shipping take?
What size room does 36,000 BTU cover?
Do you offer returns?
How can I pay?
Related Products
Ships Nationwide — Shop by State
We deliver the PRODIRECT Series 3 Ton BTU PSC Air Handler to all 50 states via FedEx, UPS, and truck freight. Each state page lists local rebate programs and utility incentives.






