3.5 Ton 42,000 BTU 14 SEER R-410A Multi-Postion Packaged Heat Pump
SKU MPH421M414A
Request a quote and we'll check when it's back, or match you to the closest in-stock unit.
We'll reply by email with availability or an in-stock alternative, and you can message us about it any time.
Sizing Help
Not sure if 40K BTU is right for your space?
Proper sizing prevents short-cycling, high bills, and premature failure. Our sizing tool takes 60 seconds.
Resources
Brochures & Manuals
Description
3.5 Ton 42,000 BTU 14 SEER R-410A Multi-Postion Packaged Heat Pump
What's in the Box
Here's what you'll receive with your order
3.5 Ton 42,000 BTU 14 SEER R-410A Multi-Postion Packaged ...
As described
Key Specifications
13.4
SEER2 Rating
40000BTU
Cooling Capacity
1750sq ft
Coverage Area
208-230V
Voltage
78dBA
Noise Level
3.5 Ton 42,000 BTU 14 SEER R-410A Multi-Postion Packaged Heat Pump — Model Details
What this specific model is sized for, how it installs, how it performs, and what it costs to run.
Room & Space Coverage — 40,000 BTU
The 3.5 Ton 42,000 BTU 14 SEER R-410A Multi-Postion Packaged Heat Pump delivers 40,000 BTU of cooling and heating capacity (3.5-ton class), sized for spaces up to 1,750 sq ft in standard 8-ft ceiling rooms with average insulation. At this capacity the unit is typically used for open-plan main floors, large garages, pole barns, finished basements, and small commercial bays. For homes with vaulted ceilings, heavy sun exposure, or poor insulation, plan on ~20% more BTU per square foot than the nominal coverage.
Efficiency & Operating Cost
This unit is rated at 13.4 SEER2 and 10.6 EER2 at full load. SEER2 measures seasonal cooling efficiency — higher is better — and 13.4 meets current federal baseline. For heating performance it carries a 6.7 HSPF2 rating, which translates to roughly 200–250% heating efficiency versus resistance electric — one kilowatt-hour of electricity moves three kWh of heat into the space at mild outdoor temperatures. Running the unit 8 hours a day at full load draws roughly 716 kWh/month — about $115/month at the US average $0.16/kWh residential rate. Real-world draw is usually 30–50% lower because inverter compressors modulate down most of the time.
Cold & Hot Weather Operating Range
This system produces rated heating capacity down to 0°F ambient, strong performance for cold-climate applications where a secondary heat source isn't needed for most of winter.
Power & Electrical Requirements
Power requirement: 208-230V 1-phase 60Hz (standard US residential 240V service). Minimum circuit ampacity is 27.8A with a maximum overcurrent protection of 40A. Wire the outdoor unit with 8 AWG copper on a dedicated 40A double-pole breaker (or single-pole at 120V), with a disconnect within sight of the condenser per NEC 440.14.
Install Difficulty — Professional Install
This is a professionally-installed condenser that requires a licensed HVAC technician with EPA 608 certification. The tech will pull a vacuum on the line set to 500 microns, pressure-test with nitrogen, release the factory charge, and commission per MrCool's startup procedure. Budget 1 full day for install on a single-zone system. Ships with R-410A refrigerant. R-410A is a mature, widely-serviced refrigerant; service technicians and parts are available at any HVAC supply house.
Sound Level & Comfort Features
Rated sound output is 78 dB(A) at full operation.
What's in the Box & Compatibility
Ships as a Package Heat Pump.
Product Details
A MRCOOL packaged heat pump combines high performance cooling and powerful heating in one convenient, easy-to-install system. These units are competitively priced and operate at 14 SEER efficiency. A MRCOOL packaged heat pump will be a great solution for tough air comfort problems in a suburban home, commercial office space, condominium, seaside villa, or wherever you desire. MRCOOL packaged heat pumps combine superior product quality, energy efficiency, quiet operation, and financial value. The units come standard with a high performance compressor and eco-safe, chlorine-free R-410A refrigerant. This is truly an all-in-one packaged unit that will deliver energy efficient air comfort with minimal environmental impact.
Specifications
| Cooling Capacity | 40,000 BTU |
| Heating Capacity | 39,000 BTU |
| SEER2 Rating | 13.4 |
| Voltage | 208-230 V |
| Refrigerant | R-410A |
| Noise Level | 78 dBA |
| Coverage Area | 1750 sq ft |
| SEER Rating | 14 |
| HSPF2 (Heating Efficiency) | 6.7 |
| HSPF | 8 |
| EER2 | 10.6 |
| Tonnage | 3.5 Ton |
| Airflow | 1400 CFM |
| Phase | 1 |
| Refrigerant Type | R-410A |
| Refrigerant Charge | 173 oz |
| Country of Origin | USA |
Features
- Warranty is 10 years on all parts if registered, 5 years if not (no licensed tech required)
- 14 SEER efficiency
- Designed for easy and convenient installation
- Optional electric heat available
- R-410A environmentally friendly refrigerant
- Built in short cycle protection to protect the compressor
- One piece "no leak" top design
- Sloped drain for improved indoor air quality
- Louvered panel coil protection
- Insulation to minimize heat loss plus reduce sound
Frequently Asked Questions
Everything you need to know about this product
What size room will the 3.5 Ton 42,000 BTU 14 SEER R-410A Multi-Postion Packaged Heat Pump cool?
Do I need a licensed HVAC installer?
Is this unit eligible for the federal 25C tax credit?
How cold can it get outside before this heat pump stops heating?
What electrical circuit do I need for installation?
How fast does HVACZAR ship this unit?
What if it arrives damaged or I change my mind?
What is the warranty on the 3.5 Ton 42,000 BTU 14 SEER R-410A Multi-Postion Packaged Heat Pump?
How long does shipping take?
What size room does 40,000 BTU cover?
What is the efficiency rating?
Do you offer returns?
How can I pay?
Related Products
Ships Nationwide — Shop by State
We deliver the 3.5 Ton 42,000 BTU 14 SEER R-410A Multi-Postion Packaged Heat Pump to all 50 states via FedEx, UPS, and truck freight. Each state page lists local rebate programs and utility incentives.