2 Ton 14 SEER Split System Air Handler
Component — Not a Complete System
This is the indoor unit only. To run, you also need a matching outdoor condenser and a refrigerant line set. Looking for the complete system instead? Browse complete 24,000 BTU systems.
SKU MAHM024CTA
Customize it — compatible add-ons only
Heat pump or AC condenser rated for this air handler.
Backup/auxiliary heat strips with circuit breaker — sized in kW by your installer.
Universally compatible tools and care items — maintenance kit, coil cleaner, install tools.
Sizing Help
Not sure if 24K BTU is right for your space?
Proper sizing prevents short-cycling, high bills, and premature failure. Our sizing tool takes 60 seconds.
Resources
Brochures & Manuals
Description
2 Ton 14 SEER Split System Air Handler
What's in the Box
Here's what you'll receive with your order
Wall-Mount Air Handler
Indoor ductless mini-split unit
Wireless Remote Control
Handheld remote with temperature control
Mounting Plate & Hardware
Wall mounting bracket and screws
Owner Manual
Installation and operation guide
Key Specifications
24000BTU
Cooling Capacity
1000sq ft
Coverage Area
208-230V
Voltage
2 Ton 14 SEER Split System Air Handler — Model Details
What this specific model is sized for, how it installs, how it performs, and what it costs to run.
Room & Space Coverage — 24,000 BTU
The 2 Ton 14 SEER Split System Air Handler delivers 24,000 BTU of cooling and heating capacity (2-ton class), sized for spaces up to 1,000 sq ft in standard 8-ft ceiling rooms with average insulation. At this capacity the unit handles medium primary rooms, master suites with attached bath, converted garages, and workshops. If your space includes a sunny west-facing wall or a finished bonus room above it, lean toward the upper end of the coverage range.
Efficiency & Operating Cost
This unit is rated at 14.5 SEER. SEER2 measures seasonal cooling efficiency — higher is better — and 14.5 meets current federal baseline. Running the unit 8 hours a day at full load draws roughly 397 kWh/month — about $64/month at the US average $0.16/kWh residential rate. Real-world draw is usually 30–50% lower because inverter compressors modulate down most of the time.
Power & Electrical Requirements
Power requirement: 208-230V 1-phase 60Hz (standard US residential 240V service). Minimum circuit ampacity is 5A with a maximum overcurrent protection of 15A. Wire the outdoor unit with 14 AWG copper on a dedicated 15A double-pole breaker (or single-pole at 120V), with a disconnect within sight of the condenser per NEC 440.14.
Install Difficulty — Professional Install
This is a professionally-installed condenser that requires a licensed HVAC technician with EPA 608 certification. The tech will pull a vacuum on the line set to 500 microns, pressure-test with nitrogen, release the factory charge, and commission per MrCool's startup procedure. Budget 1 full day for install on a single-zone system. The system supports line set lengths up to 50ft; longer runs are available as accessory kits. Plan the shortest practical route — every 10ft of line set adds roughly 2% capacity loss. Ships with R-410A refrigerant. R-410A is a mature, widely-serviced refrigerant; service technicians and parts are available at any HVAC supply house.
Sound Level & Comfort Features
The indoor blower offers 3 fan speeds for basic airflow control.
Warranty & Certifications
When you register your unit within 60 days of purchase you get Registered 10 Year Parts Warranty on parts through MrCool's registered warranty program. Unregistered coverage drops to 5 Year Parts Warranty — registration takes 3 minutes at mrcool.com and is the highest-ROI post-purchase step you can take. AHRI certified and UL/ETL listed for North American electrical safety — required for most utility rebate and tax credit programs.
What's in the Box & Compatibility
Ships as a Air Handler.
Product Details
The MRCOOL Multi-Position Air Handler is designed to deliver dependable comfort, and is built for reliability. The permanent split capacitor (PSC) motor delivers consistent airflow throughout the seasons, allowing you to remain relaxed at all times. When choosing a MRCOOL Multi-Position Air Handler, you can always know that you are being energy and time efficient.
Specifications
| Cooling Capacity | 24,000 BTU |
| Voltage | 208-230 V |
| Refrigerant | R-410A |
| Coverage Area | 1000 sq ft |
| Max Line Set | 50 ft |
| SEER Rating | Up to 14.5 |
| Tonnage | 2 Ton |
| Airflow | 800 CFM |
| Phase | 1 |
| Refrigerant Type | R-410A |
| Liquid Line Size | 3/8 |
| Suction Line Size | 3/4 |
| Country of Origin | Mexico |
Features
- Smaller profile for closet applications
- Optional auxiliary heat kits available
- Baked polyester paint finished over galvanized steel for maximum duraility
- Antimicrobial treated drain pan to resist mold and mildew growth
- Factory tested for leakproof construction
- Foil faced insulation for enhanced indoor air quality
- CoolGuard total corrosion protection technology designed coil
- Built-in indoor time delay for increased efficiency and comfort
- One piece design
- High-strength/heat resistant/corrosion resistance SMC drain pans
Frequently Asked Questions
Everything you need to know about this product
What size room will the 2 Ton 14 SEER Split System Air Handler cool?
Do I need a licensed HVAC installer?
What electrical circuit do I need for installation?
What warranty do I get?
How fast does HVACZAR ship this unit?
What if it arrives damaged or I change my mind?
What is the warranty on the 2 Ton 14 SEER Split System Air Handler?
How long does shipping take?
What size room does 24,000 BTU cover?
Do you offer returns?
How can I pay?
Related Products
Ships Nationwide — Shop by State
We deliver the 2 Ton 14 SEER Split System Air Handler to all 50 states via FedEx, UPS, and truck freight. Each state page lists local rebate programs and utility incentives.