MRCOOL® VersaPro™ 42k BTU Heat Pump Package Unit
SKU MPH421H413B
Request a quote and we'll check when it's back, or match you to the closest in-stock unit.
We'll reply by email with availability or an in-stock alternative, and you can message us about it any time.
Sizing Help
Not sure if 42K BTU is right for your space?
Proper sizing prevents short-cycling, high bills, and premature failure. Our sizing tool takes 60 seconds.
Resources
Brochures & Manuals
Description
MRCOOL® VersaPro™ 42k BTU Heat Pump Package Unit
What's in the Box
Here's what you'll receive with your order
MRCOOL® VersaPro™ 42k BTU Heat Pump Package Unit
As described
Key Specifications
13.4
SEER2 Rating
42000BTU
Cooling Capacity
208-230V
Voltage
42000BTU
Heating Capacity
MRCOOL® VersaPro™ 42k BTU Heat Pump Package Unit — Model Details
What this specific model is sized for, how it installs, how it performs, and what it costs to run.
Room & Space Coverage — 42,000 BTU
The MRCOOL® VersaPro™ 42k BTU Heat Pump Package Unit delivers 42,000 BTU of cooling and heating capacity, sized for spaces up to 2,000 sq ft in standard 8-ft ceiling rooms with average insulation. At this capacity the unit is typically used for open-plan main floors, large garages, pole barns, finished basements, and small commercial bays. For homes with vaulted ceilings, heavy sun exposure, or poor insulation, plan on ~20% more BTU per square foot than the nominal coverage.
Efficiency & Operating Cost
This unit is rated at 13.4 SEER2. SEER2 measures seasonal cooling efficiency — higher is better — and 13.4 meets current federal baseline. Running the unit 8 hours a day at full load draws roughly 752 kWh/month — about $120/month at the US average $0.16/kWh residential rate. Real-world draw is usually 30–50% lower because inverter compressors modulate down most of the time.
Power & Electrical Requirements
Power requirement: 208-230V 1-phase 60Hz (standard US residential 240V service). Minimum circuit ampacity is 24.2A with a maximum overcurrent protection of 35A. Wire the outdoor unit with 8 AWG copper on a dedicated 35A double-pole breaker (or single-pole at 120V), with a disconnect within sight of the condenser per NEC 440.14.
Install Difficulty — Professional Install
This is a professionally-installed condenser that requires a licensed HVAC technician with EPA 608 certification. The tech will pull a vacuum on the line set to 500 microns, pressure-test with nitrogen, release the factory charge, and commission per MrCool's startup procedure. Budget 1 full day for install on a single-zone system. Ships with R410A refrigerant. R-410A is a mature, widely-serviced refrigerant; service technicians and parts are available at any HVAC supply house.
Warranty & Certifications
When you register your unit within 60 days of purchase you get 10 Years on parts and 10 Years on the compressor through MrCool's registered warranty program. Unregistered coverage drops to 5 Years / 5 Years — registration takes 3 minutes at mrcool.com and is the highest-ROI post-purchase step you can take. AHRI certified and UL/ETL listed for North American electrical safety — required for most utility rebate and tax credit programs.
What's in the Box & Compatibility
Ships as a Package Heat Pump.
Product Details
In times of extreme weather, the MRCOOL® VersaPro™ 42K BTU 13.4 SEER2 Package Heat Pump is a high quality and affordable solution, seamlessly blending powerful cooling and heating capabilities within a single, hassle-free system. Encased in an anti-rust, power-painted galvanized steel cabinet, this sensible heating and cooling solution strikes a balance between cost-effectiveness and resilience. The unit's high-performance compressors operate smoothly, quietly, and consistently, strengthened by internal safeguards that shield them against high and low pressures, coil temperature fluctuations, and power fluctuations, thus enhancing their operational lifespan. Thanks to its ECM blower motor and optimized copper tube and aluminum fin indoor and outdoor coils, this package heat pump offers remarkable efficiency, boasting a 13.4 SEER2 rating while utilizing environmentally friendly R410A refrigerant. Featuring a horizontal discharge design, the unit has the added flexibility to accommodate an electric heat kit if desired. Having undergone rigorous testing to become AHRI certified and ETL listed, this package heat pump guarantees adherence to the most stringent quality benchmarks, ensuring reliable home comfort. For additional peace of mind, registering the unit within 90 days activates an extensive 10-year warranty covering both parts and the compressor. Even without registration, the unit is backed by a standard 5-year parts and compressor warranty.
Specifications
| Cooling Capacity | 42,000 BTU |
| Heating Capacity | 42,000 BTU |
| SEER2 Rating | 13.4 |
| Voltage | 208-230 V |
| Refrigerant | R410A |
| Phase | 1 |
| Refrigerant Type | R410A |
| Refrigerant Charge | 106 oz |
Features
- Intertek Cert: 3124627
- Quiet Horizontal Discharge
- Durable Galvanized Steel Cabinet
- High Efficiency Compressor
- Internal Safeguards
- Copper Tube/Aluminum Fin Coil
- Optional Electric Heat Kit
Frequently Asked Questions
Everything you need to know about this product
What size room will the MRCOOL® VersaPro™ 42k BTU Heat Pump Package Unit cool?
Do I need a licensed HVAC installer?
Is this unit eligible for the federal 25C tax credit?
What electrical circuit do I need for installation?
What warranty do I get?
How fast does HVACZAR ship this unit?
What if it arrives damaged or I change my mind?
What is the warranty on the MRCOOL® VersaPro™ 42k BTU Heat Pump Package Unit?
How long does shipping take?
What size room does 42,000 BTU cover?
What is the efficiency rating?
Do you offer returns?
How can I pay?
Related Products
Ships Nationwide — Shop by State
We deliver the MRCOOL® VersaPro™ 42k BTU Heat Pump Package Unit to all 50 states via FedEx, UPS, and truck freight. Each state page lists local rebate programs and utility incentives.