1.5 Ton 15 SEER2 PRODIRECT Series Heat Pump Condeners
Component — Not a Complete System
This is the outdoor unit only. To run, you also need a matching indoor air handler and a refrigerant line set. Looking for the complete system instead? Browse complete 18,000 BTU systems.
SKU HHP15018FA
Request a quote and we'll check when it's back, or match you to the closest in-stock unit.
We'll reply by email with availability or an in-stock alternative, and you can message us about it any time.
Sizing Help
Not sure if 18K BTU is right for your space?
Proper sizing prevents short-cycling, high bills, and premature failure. Our sizing tool takes 60 seconds.
Description
1.5 Ton 15 SEER2 PRODIRECT Series Heat Pump Condeners
What's in the Box
Here's what you'll receive with your order
1.5 Ton 15 SEER2 PRODIRECT Series Heat Pump Condeners
As described
Key Specifications
15.2
SEER2 Rating
18000BTU
Cooling Capacity
208/230V
Voltage
72dBA
Noise Level
18000BTU
Heating Capacity
1.5 Ton 15 SEER2 PRODIRECT Series Heat Pump Condeners — Model Details
What this specific model is sized for, how it installs, how it performs, and what it costs to run.
Room & Space Coverage — 18,000 BTU
The 1.5 Ton 15 SEER2 PRODIRECT Series Heat Pump Condeners delivers 18,000 BTU of cooling and heating capacity, sized for spaces up to 900 sq ft in standard 8-ft ceiling rooms with average insulation. At this capacity the unit handles medium primary rooms, master suites with attached bath, converted garages, and workshops. If your space includes a sunny west-facing wall or a finished bonus room above it, lean toward the upper end of the coverage range.
Efficiency & Operating Cost
This unit is rated at 15.2 SEER2. SEER2 measures seasonal cooling efficiency — higher is better — and 15.2 meets current federal baseline. Running the unit 8 hours a day at full load draws roughly 284 kWh/month — about $45/month at the US average $0.16/kWh residential rate. Real-world draw is usually 30–50% lower because inverter compressors modulate down most of the time.
Power & Electrical Requirements
Power requirement: 208/230V 1-phase 60Hz (standard US residential 240V service). Minimum circuit ampacity is 13A with a maximum overcurrent protection of 20A. Wire the outdoor unit with 12 AWG copper on a dedicated 20A double-pole breaker (or single-pole at 120V), with a disconnect within sight of the condenser per NEC 440.14.
Install Difficulty — Professional Install
This is a professionally-installed condenser that requires a licensed HVAC technician with EPA 608 certification. The tech will pull a vacuum on the line set to 500 microns, pressure-test with nitrogen, release the factory charge, and commission per MrCool's startup procedure. Budget 1 full day for install on a single-zone system. Ships with R410A refrigerant. R-410A is a mature, widely-serviced refrigerant; service technicians and parts are available at any HVAC supply house.
Sound Level & Comfort Features
Rated sound output is 72 dB(A) at full operation.
Product Details
Discover the 1.5 Ton PRODIRECT™ Series Heat Pump, the ultimate solution for those seeking unmatched efficiency and dependable performance. With a SEER2 rating of up to 15.2, this system operates using chlorine-free R410A refrigerant and includes an energy-efficient compressor to ensure consistent performance. Engineered with durability in mind, this heat pump features a high-quality condenser with inner-groove copper tubes and aluminum fins. It also has service valves for sweat connections and accessible gauge ports, making maintenance more streamlined. The 18K PRODIRECT™ model prioritizes safety, incorporating factory-installed high and low-pressure switches. Its sound-control top helps maintain noise levels at 72 decibels, similar to that of a hair dryer, contributing to a comfortable home environment. Additionally, its compact design allows for easy installation and hassle-free transportation, while the wire fan discharge grille and steel louver coil guard enhance durability. Homeowners can also add an optional drier filter as an accessory. This unit is AHRI-certified and ETL-listed, meeting strict HVAC industry standards. To protect your investment, MRCOOL® provides a standard 5-year warranty plus an additional 5-year extended parts and compressor warranty upon registration. With its focus on steady performance and long-term reliability, the 1.5 Ton PRODIRECT™ Series Heat Pump is an excellent option for homeowners.
Specifications
| Cooling Capacity | 18,000 BTU |
| Heating Capacity | 18,000 BTU |
| SEER2 Rating | 15.2 |
| Voltage | 208/230 V |
| Refrigerant | R410A |
| Noise Level | 72 dBA |
| Phase | 1 |
| Refrigerant Type | R410A |
| Refrigerant Charge | 84 oz |
| Liquid Line Size | 3/8 |
| Suction Line Size | 3/4 |
Features
- R410A chlorine-free refrigerant
- Energy-efficient compressor
- Internal protection against high temperature motor overload conditions
- AHRI certified and ETL listed
- Unique sound control top design
- Compact design, easy installation and transportation
- High quality condenser with inner-groove copper tube and aluminum fins
- Wire fan discharge grille
Frequently Asked Questions
Everything you need to know about this product
What size room will the 1.5 Ton 15 SEER2 PRODIRECT Series Heat Pump Condeners cool?
Do I need a licensed HVAC installer?
Is this unit eligible for the federal 25C tax credit?
What electrical circuit do I need for installation?
How fast does HVACZAR ship this unit?
What if it arrives damaged or I change my mind?
What is the warranty on the 1.5 Ton 15 SEER2 PRODIRECT Series Heat Pump Condeners?
How long does shipping take?
What size room does 18,000 BTU cover?
What is the efficiency rating?
Do you offer returns?
How can I pay?
Related Products
Ships Nationwide — Shop by State
We deliver the 1.5 Ton 15 SEER2 PRODIRECT Series Heat Pump Condeners to all 50 states via FedEx, UPS, and truck freight. Each state page lists local rebate programs and utility incentives.