ProDirect 2.5 Ton up to 15 SEER2 Split System A/C Condenser
Component — Not a Complete System
This is the outdoor unit only. To run, you also need a matching indoor air handler and a refrigerant line set. Looking for the complete system instead? Browse complete 28,000 BTU systems.
SKU HAC15030
Request a quote and we'll check when it's back, or match you to the closest in-stock unit.
We'll reply by email with availability or an in-stock alternative, and you can message us about it any time.
Sizing Help
Not sure if 28K BTU is right for your space?
Proper sizing prevents short-cycling, high bills, and premature failure. Our sizing tool takes 60 seconds.
Description
ProDirect 2.5 Ton up to 15 SEER2 Split System A/C Condenser
What's in the Box
Here's what you'll receive with your order
ProDirect 2.5 Ton up to 15 SEER2 Split System A/C Condenser
As described
Key Specifications
14.3
SEER2 Rating
28000BTU
Cooling Capacity
230V
Voltage
61dBA
Noise Level
ProDirect 2.5 Ton up to 15 SEER2 Split System A/C Condenser — Model Details
What this specific model is sized for, how it installs, how it performs, and what it costs to run.
Room & Space Coverage — 28,000 BTU
The ProDirect 2.5 Ton up to 15 SEER2 Split System A/C Condenser delivers 28,000 BTU of cooling and heating capacity (2.5-ton class), sized for spaces up to 1,500 sq ft in standard 8-ft ceiling rooms with average insulation. At this capacity the unit handles medium primary rooms, master suites with attached bath, converted garages, and workshops. If your space includes a sunny west-facing wall or a finished bonus room above it, lean toward the upper end of the coverage range.
Efficiency & Operating Cost
This unit is rated at 14.3 SEER2 and 11.7 EER2 at full load. SEER2 measures seasonal cooling efficiency — higher is better — and 14.3 meets current federal baseline. Running the unit 8 hours a day at full load draws roughly 470 kWh/month — about $75/month at the US average $0.16/kWh residential rate. Real-world draw is usually 30–50% lower because inverter compressors modulate down most of the time.
Power & Electrical Requirements
Power requirement: 230V 1-phase 60Hz (standard US residential 240V service).
Install Difficulty — Professional Install
This is a professionally-installed condenser that requires a licensed HVAC technician with EPA 608 certification. The tech will pull a vacuum on the line set to 500 microns, pressure-test with nitrogen, release the factory charge, and commission per MrCool's startup procedure. Budget 1 full day for install on a single-zone system.
Sound Level & Comfort Features
Rated sound output is 61 dB(A) at full operation.
Warranty & Certifications
When you register your unit within 60 days of purchase you get 10 year parts on parts through MrCool's registered warranty program. AHRI certified and UL/ETL listed for North American electrical safety — required for most utility rebate and tax credit programs.
What's in the Box & Compatibility
Ships as a Split System AC Condensers.
Product Details
There isn’t much you can do with an air conditioning system that’s boosting your bills and the temperature of your home besides replace it, and for that, you should choose the ProDirect 2.5 Ton 15 SEER Split System A/C Condenser. The rotary compressor within this system allows it to be faster and more efficient than other systems. The piston flow control device further improves efficiency, as well, making for a system that will drop both your bills and your home’s temperature lower than you can remember. This condenser will be one of the toughest units you’ve ever had in your home. You’ll love how sturdy the galvanized steel cabinet is, and how the Gold Fin® coating repels water and stops corrosion and rust in its tracks. There’s barely any risk of your system getting damaged thanks to the protection of the non-toxic, environmentally friendly Gold Fin® coating. This unit, which is ETL listed and AHRI rated, has serious warranty protection when registered. Never suffer through another sweaty summer again with the cooling power of this MRCOOL ProDirect 2.5 Ton split system A/C condenser.
Specifications
| Cooling Capacity | 28,000 BTU |
| SEER2 Rating | 14.3 |
| Voltage | 230 V |
| Noise Level | 61 dBA |
| EER2 | 11.7 |
| Tonnage | 2.5 Ton |
| Airflow | 3350 CFM |
| Phase | 1 |
| Refrigerant Charge | 111.11 oz |
| Liquid Line Size | 3/8 |
| Suction Line Size | 3/4 |
Features
- Equipment should be installed by a qualified professional
- 10 Year Registered Warranty
- 15 SEER
- R-410A environmentally friendly refrigerant
- AHRI Certified & ETL listed
- Pressure and Temperature protection sensors help prevent damage
- A shape coils, constructed with copper tubing and enhanced aluminum fins.
- Gold Fin® condenser: corrosion resistant - live on the coast? Don't worry, our condenser is built to resist long term corrosion
Frequently Asked Questions
Everything you need to know about this product
What size room will the ProDirect 2.5 Ton up to 15 SEER2 Split System A/C Condenser cool?
Do I need a licensed HVAC installer?
Is this unit eligible for the federal 25C tax credit?
What electrical circuit do I need for installation?
What warranty do I get?
How fast does HVACZAR ship this unit?
What if it arrives damaged or I change my mind?
What is the warranty on the ProDirect 2.5 Ton up to 15 SEER2 Split System A/C Condenser?
How long does shipping take?
What size room does 28,000 BTU cover?
What is the efficiency rating?
Do you offer returns?
How can I pay?
Related Products
Ships Nationwide — Shop by State
We deliver the ProDirect 2.5 Ton up to 15 SEER2 Split System A/C Condenser to all 50 states via FedEx, UPS, and truck freight. Each state page lists local rebate programs and utility incentives.






